Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 20-0600
Show Control / System Processing Installed Cart
This custom show control cart is designed for installed applications. The all-black finish helps it blend into any background. The primary applications are for show control and or PA system processing.
The cart features a dual monitor Ergotron mount allowing monitors to be positioned wherever users need them. The work surface is laminated with black Formica as a smooth covering for writing. The work surface features a 2U rack section that is loaded with a LM Tour Systems LMAB light module. This light module features a dimmable gooseneck light for the work surface in addition to 2 switched banks for the rack’s LED lights. The below rack features blue LED lights mounted in the front & red LED lights mounted in the back. Below the main worksurface is a slide out shelf. This shelf features multi-point locking latches that allow the shelf to be locked in various 1” increments via a single pull handle.
The 14U rack section is 26.75” deep. Front and rear rails are recessed 3” with 20” between the rails. The back of the rack features a vented door with slam latches.
The case exterior and all interior components are built from ¾” Baltic Birch finished with black texture coating. All hardware and fasteners are black. The case rides on 4” casters with the front 2 locking.
For a detailed Project Spotlight video on this case, CLICK HERE.
- REFERENCE: 20-0600
- CATEGORY: Audio/Visual CATEGORY: Custom Integration
Related Products
Custom Video Flypack Case w/Integrated LED Lighting
This custom video flypack case built by LM Cases for the Pennsylvania Entertainment Group is a compact, all-in-one mobile production system designed for seated operation. It features a flip-up lid with dual 24” Dell Ultrasharp monitors, integrated audio monitors, LED task lighting, a slide-out work surface, multiple shock-mounted rack sections, and storage drawers.
The system includes dedicated mounting for video switchers, camera control units, and PTZ controllers, along with courtesy power and charging ports throughout. Gas-spring-assisted lids, organized cable looms, recessed rack rails, and configurable storage drawers enhance usability and protection. Constructed from rugged laminated plywood with heavy-duty hardware and field casters, the flypack is built for reliable performance in live production and touring environments.
Custom FOH Workstation For Avid S6L-32D Console
This custom installed workstation was designed to house an Avid S6L-32D console as a permanent house console setup for a theater. The workstation includes dual 14U rack sections, three storage drawers, and an integrated workspace for live sound operation.
Constructed from ¾” Baltic Birch plywood with a black textured finish, the workstation features a 5.25” deep doghouse with a hinged lid to conceal console connections. Two fully articulating Ergotron monitor arms provide flexible screen positioning on either side of the console, and a slide-out keyboard shelf mounted on heavy-duty Accuride glides sits beneath the main work surface.
The lower section houses two 14U racks with vented rear doors, along with three drawers for equipment storage, protected by a removable clear Lexan cover. The workstation is finished with recessed Penn Elcom handles and 3.5” Colson casters for mobility.
Custom Installed Solid Walnut Conference Room Workbox
This custom furniture-grade equipment case was designed to store wireless microphones, belt packs, and communication devices in a conference room installation while blending into a professional interior environment.
Constructed from solid walnut with dovetail joints, the case matches the size of a 16-space studio rack for coordinated installations. It includes four drawers: one for Shure ULXD handheld microphones, one with adjustable dividers for accessories, one with foam for Clear-Com belt packs, and one for Shure rechargeable batteries.
The case also features rack spaces for additional equipment, with a 1U section on top and a 2U section below, along with rear rack rails concealed by a walnut panel. Recessed handles and locking casters provide discreet mobility.
Custom Workstation Road Case For A ETC Apex 5 Lighting Console
This custom lighting workstation was built for Walt Disney World to house an ETC APEX 5 lighting console for outdoor show use.
The workstation features a slide-out shelf for the console with integrated power outlets and USB charging, along with a pole-mounted monitor on an articulating mount. A cable management doghouse and trough system keeps wiring organized and protected.
The lower section includes a 13U shock-mounted rack with cooling fans, temperature monitoring, and a custom LM Tour Systems I/O panel providing power, network, and fiber connectivity. A dedicated foam-lined compartment stores the monitor safely during transport, and two storage drawers provide additional space for accessories.
Built from ABS-laminated plywood, the workstation includes sliding pocket doors, recessed hardware, and heavy-duty Colson casters, creating a durable, mobile solution for professional lighting control.
Video Flypack For Installed Applications
This custom video production cart is designed for theatrical applications. The cart is finished with black texture coating and features all black hardware to help it blend in.
Yamaha TF1 Installed FOH Workstation
This custom installed workstation was designed for a Yamaha TF1 console. The workstation features all black hardware and is used in a front of house application in a church.
Small Format Event Tech Workbox For Loyola University
This case was designed for the Event Services department at Loyola University. The workbox features LED lighting, courtesy power with USB charge ports, drawers and a pop up table.
Large Format Touring Production Workstation
This custom production workstation was designed for All Of It Now. The extra wide workstation is designed to be an all-encompassing storage solution for backstage applications.
Single Position Video Broadcast Workstation
This custom video flypack case was built for SoCal Rentals. The case is designed to be a prewired, quickly deployable video production rig.
Compact Guitar Tech Case For Fly Dates
This case is designed for the touring guitar tech who needs a smaller workbox for fly dates and smaller venues. The case features a ½” black marine grade plastic deck piece. The deck includes 2 fold outs designed to expand the work surface and hold the guitar in place by its body and neck. Each of the fold outs are mounted via position control hinges. These hinges perform in the same way as a laptop screen allowing the fold outs to be mounted at any angle along a 90-degree plane. The neck support features rubber bushings arranged in a “V” to allow the gripping of any neck shape. The body support features a piece of purple crushed velvet foam and a “V” shaped piece of ½” marine grade plastic to lock the guitar in place via the strap button.
Printer Workbox w/Rack Section & Custom Bourbon Barrel Laminate
This custom case built for Studio 46 is a portable, on-site printing station that combines a slide-out laser printer shelf, two storage drawers, and an integrated 6RU rack section for networking and power equipment. The rack includes a custom LM Tour Systems courtesy power distribution unit with USB charging, additional courtesy outlets, and a power system featuring a retractable cable reel and automatic voltage regulation. Finished in a bourbon barrel–themed laminate and equipped with heavy-duty touring hardware, the case delivers a polished, all-in-one mobile workstation designed for reliable use in live and production environments.
Video Wall Flypack w/Custom IO & Power Distribution
This custom video flypack was built for Sure Sound & Lighting as a central hub for video wall processing. The flypack features 3 monitors, triple wide patch sections, a slide out worksurface, a 14RU shock mount rack section and a custom IO panel and power distro.
Triple Wide Video Flypack w/Articulating Monitor Arms
This custom video flypack was designed for House Right Production. The triple wide work station allows for video production while maintaining clean sight lines to the stage.
Square Register Portable Point Of Sale Work Station
This custom touring merchandise case built for The Bubble Group is a fully integrated, show-ready point-of-sale system designed for fast and efficient merch sales. Built around a Square Register POS, the case houses a cash drawer, receipt printer, integrated power and networking, and a front-mounted 32” monitor for digital signage. Rugged construction, organized internal storage, and professional electronics integration make this case a reliable all-in-one solution for touring merchandise operations.
QSC Q-Sys System Tech Workstation
This case was designed for Walt Disney Parks as a PA system tech workstation. The case is based around a QSC Q-Sys system. The workstation includes a Dell 24” touch monitor, Formica laminated work surface, shock mounted rack section, custom IO panel and storage drawers.
Large Format Stage Managers Desk w/Satellite Return Desk
This custom stage manager’s console case was designed for an installed application in a college theater. The workstation includes monitor mounts, custom LED lights, a tilting work surface, rack section, and a custom rack mounted power distribution system.
50 Capacity Covid Testing Kit Package For Touring Crews
This case was designed for Spotlight Medical as a way to transport 50 Accula Covid testers. The case is intended for touring applications where daily testing of large crews is required.
Black Magic ATEM 2 M/E FOH Directors Flypack w/Custom LED Logo Lights
The custom FOH director’s video flypack is based around a Black Magic ATEM 2 M/E broadcast panel. The case is designed for live switching positioned at FOH. The case features a slide out shelf with the ATEM 2 M/E panel, 2 foldable monitor arms, drawers and custom color changing LED lights with the company logo routed in.
Analog Way RS1 Video Processor Pocket Door Rack w/Custom LED Logo Lights
This case was built for Paradise Productions for their Analog Way RS1 video processing system. The case features a 10u rack section, 2 drawers, pocket doors and custom routed LED lights of the Paradise Productions logo.
Large Format Mic & Stand Workbox
This large format microphone/stand workstation is designed for touring and installed applications. The “all in one” format holds 35 mic stands and 63 microphones in individual compartments.