Recording & Post
Studio Control Room Storage Rack/Workbox - 6U Solid Walnut
The studio control room storage rack is designed to hold rack mount equipment and peripherals in a decorative unit for installed applications. The rack is perfect for home studios, conference rooms and houses of worship where a high quality, aesthetically pleasing storage solution is required.
18RU Double Wide Studio Furniture Grade Rack
This case was designed for Crossroads Church for use in their production studio. The rack is 18U tall and features a 26” deep shell.
Video Streaming Fly Pack w/Articulating Monitor Arm & 16RU Rack
This case is designed with mobile audio and video productions in mind. The 3 axis monitor mounting system allows the display to be angled in a sitting or standing position, extended, and moved to the left or right of center. A position control board handles the monitors angle. Friction hinges are used allowing the screen to be raised to a vertical position or laid flat. These friction hinges allow the monitor to behave in the same manner as a laptop screen: the screen can be positioned in any position along a 90 degree plane without the need for ratcheting mechanisms or support rods. A Chief K2W120B mount is installed to allows the display to be positioned left or right of center, in addition to 15” of extension towards the user.
Universal Audio Satellite & Apollo Waterproof Transport Case
This case is designed to hold a Universal Audio Satellite desktop DSP accelerator, Apollo audio interface, their power supplies, and Thunderbolt cables. Each item is held in a custom CNC cut PE foam compartment. An accessory area is located under the Satellite for its IEC cable and PSU. An accessory compartment is located under the Apollo for its “wall wart” style PSU. A 5.5” wide x 2.5” deep x 4.5” tall accessory compartment is provided for 2 Thunderbolt cables. The custom foam insert is mounted into a black Pelican 1450 case.
Compact Flypack Production Workstation
This case is designed to be a portable video fly pack workstation. The case includes a Chief FTR1U tilting monitor mount allowing a monitor to be mounted in the case lid. Also included are two slide out shelves to hold a laptop, audio mixer or a video switcher. Below the dual slide out shelf’s is a 9RU rack section. The rack rails are mounted to the case via rubber vibration isolation mounts. The rack section features rear rack rail and a trap door. The case exterior is built out of 3/8” plywood laminated with your choice of ABS colors. The case features deep recessed hardware and rides on 4” Colson casters mounted on a ¾” caster board that spans the entire bottom of the case.
Sonnet RackMac Pro Flypack Case
This flypack system was designed for the Farm League. The system is based around a Sonnet MacRack Pro mounted in a 6RU rack housed in a Pelican 1630 case.
Presonus 24.4.2. Audio Flypack Workstation
This case was built for Creative Live as the audio portion of a portable audio & video mobile rig, CLICK HERE to see the matching video case. The case features a rack mount section for the Presonus StudioLive 24.4.2 with a video monitor mounted in the lid above the console. The lid features 3 large barn doors to keep the glare down as well as prevent light pollution from the monitor on dark sets. Below the mixer section is a 16 space rack section and 4 drawers.
Carlson Audio Mobile Pro Tools Recording Flypack
This case was designed for Carlson Audio Systems as a portable recording fly pack. The case features a 27" Apple Cinema Display monitor mounted on an articulating mount on a position control board. The case also features storage for 2 Yamaha HS10 monitors, Apple MacPro tower and a 10 space shock mounted rack section.
Portable Video Fly-Pack Case
This case was designed to be a portable pre-wired video fly pack. The case features dual 24" Dell Ultrasharp monitors, dual 4 space shock mounted racks, a stationary work surface, a retractable switcher work surface, and dual 9 space shock mounted racks below the switcher.
RED Rack: Noise Reducing Production Rack
The LM Cases RED Rack is designed to be the pinnacle portable noise reduction chamber for your studio equipment. With over 2 years of testing and development we are proud to share our RED Rack with you!
Summit Audio Half Rack Processor Case – 2BA-221/TLA50/FeQ-50/TD-100
This case is designed to fit all Summit Audio half rack audio processors including the: 2BA-221 preamp, FeQ-50 EQ, TLA-50 compressor and the TD-100 DI. The case holds each unit in a custom CNC cut foam insert that contours the front and rear allowing the knobs and switches to remain untouched. There is storage below the unit for the power cord. The foam is mounted in a Pelican 1470 case this both lightweight and completely waterproof.
Avalon U5 Pelican 1450 Case
This case was built for dmr-rents.com. The case is designed around a Pelican 1450 waterproof case. The U5 is cradled in a custom cut foam insert that accommodates the ground lift switch in the back of the unit as well as front controls. The front of the unit is supported with a pice of foam that lies between the "speaker to input" and "active to thru" buttons on the front of the unit. The insert also accommodates the units rubber feet and provides storage for the power cable.
10 RU Recording Outboard Rack
This case is designed to hold rack mounted outboard gear as well as a computer keyboard and mouse, the case will be used in a mobile production environment as well as in a studio. The rack is complementary to our sound isolation rack, where the computer and hard drives are stored in the isolation rack; the mouse, keyboard and monitor are located on the outboard rack. This is beneficial in studios that use mixing consoles, the case can be placed perpendicular to the mixer and allow the user a place to hold their computer monitor, mouse and keyboard; while the isolation rack that holds the computer can be kept at a distance.
Apple Mac Pro Flypack Case
This case was designed with the mobile recordist in mind. The case holds an Apple Mac Pro tower in a 2" foam lined compartment and a foam shock mounted 8 RU rack above the computer. The computer is held in with foam blocks allowing the front of the computer to remain flush with the front foam of the case. The back of the computer compartment has blocks that hold the computer by the corners to allow room for all connections on the back of the computer and prevent it from moving front to back in the compartment. There is a "U" shaped cable passage between the computer and the rack to allow cable connectivity between the two compartments without interfering with the rear lid.