Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 14-1000
Sony RM-B170 / RCP-1500 Adapter
These adapters were designed for Panavid to allow them to use their RM-B170 camera controllers in the same size compartment as their RCP-1500 controllers. Their controllers are mounted in a slide out drawer, these adapters allow interchangeability between the 2 models allowing them maximum flexibility.
The adapters are built out of 1/2" marine grade plastic and CNC cut to conform to the curves and contours of the units. The controllers are mounted via the 4 factory inset nuts on the back of each controller. The back of the mount features an open hole allowing cables to pass through.
Special thanks to Panavid!
- REFERENCE: 14-1000
- CATEGORY: Audio/Visual CATEGORY: Custom Integration
Related Products
Blackmagic Design URSA Mini Pro w/Fujinon Lens & Viewfinder Camera Chain Case
This custom LM Cases solution is designed to safely transport a Blackmagic URSA Mini Pro 4.6K G2 camera chain. A precision CNC-cut foam insert securely holds the camera body with a Fujinon lens attached, along with the URSA Studio Viewfinder and additional accessories. The foam insert is housed inside a rugged SKB iSeries case, providing durable, travel-ready protection for professional video equipment.
Modular Generic RCP Case - 4 Capacity
This case is designed to hold remote control panel style camera controllers for National Micro Rentals. The case features a removable inner caddy allowing it to operate outside of its exterior road case. The caddy features a slidable top panel allowing a variety of RCP sizes to be used.
Black Magic URSA Broadcast G2 Camera Chain Case
This case was designed to hold a complete camera chain based around a Black Magic URSA Broadcast G2 camera with an attached Fuginon lens. The equipment list includes a Sachtler tripod, with attached camera head and removable dolly. Also included is the URSA Studio Viewfinder in a separate compartment. The focus cable is held in the removable tray via custom notches in the divider network. This allows the cable to remain in a specific compartment to prevent damage. The focus and zoom controllers are held in individual compartments in the removable tray.
Univ. Of Texas Stadium Camera Trunk w/Tablet Charging
This trunk was designed for the University Of Texas to hold cameras, tripods and tablets.
Vinten Vector 750 Pan/Tilt Head Road Case
This case is designed to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut, PE foam insert that is designed to contour and support the unit. The case is designed with broadcast truck packs in mind; ½” marine grade plastic is positioned at all high stress internal points allowing the case to be flipped. The foam insert includes 1.625”, and 1.125” diameter holes for arms.
Panasonic AW UE150 PTZ Camera Case
This case is designed to hold a Panasonic AW UE150 PTZ camera. Custom foam blocking is mounted in a way to support the camera head during transport. A accessory compartment is provided for additional storage. The exterior case is built from ¼” plywood laminated with your choice of ABS plastic colors.
Nikon D810 Camera System Pelican 1510 Case
This case was built for Elevate Life Church to hold a Nikon D810 camera body and lens kit.
Sony Camera Chain Case
This case was designed for AVI-SPL to hold a Sony camera system. The case holds all camera components for rental applications including the camera body, preview monitor, lenses, camera control unit, cable reel and Telex com head set.
Sony RCP1500 Sliding Rack Mount Fly Pack Shelf
This sliding shelf is designed to hold 3 Sony RCP1500 camera controllers in a rack mount format. The shelf features a multi-position locking latch system that allows the shelf to be extended and locked into 14 positions of extension by pulling the front T handle. The shelf also features a padded palm rest at the front below the controllers. The shelf requires mounting to the front and rear rack rails of a rack case. The minimum rail to rail depth is 20”.
Miami Dolphins Projector/Document Camera Workstation
This case was designed for the Miami Dolphins to display video and photos for team presentations. The case features a projector, and a document camera attached to a top work surface. The system is designed with quick setup and tear down in mind. All components are permanently wired allowing the user to simply remove the case lids and plug the system into a power source.
Vinten Vector 750 Pan Head Case
This case was designed for NEP to hold a Vinten Vector 750 camera head. The camera head is held in a custom CNC cut foam insert. The exterior case is built out of 1/4" plywood laminated with black ABS plastic and features a custom silkscreen of the NEP logo.
NHK Camera Tripod Head Case
This case was designed for NHK America to hold a camera tripod head. The head is held in a custom CNC cut foam insert with a removable marine grade plastic divider that allows for storage of 2 control arms and an extension arm on top of the head.
NHK America Canon Digi-Super 100 Camera Lens Case
This case was designed for NHK America to hold their Canon Digi Super 100 lens. The case features a custom foam lined compartment for the lens and a separate compartment for the zoom and focus controls.
Portable DIT Monitor Rack Case
This custom LM Cases rack system was built for Farm League as the monitor and control front end for their portable digital image transfer workstation. It houses a tilting 17" Blackmagic SmartView HD monitor, a SmartView Duo preview monitor, and a slide-out Tangent Element controller secured with custom CNC brackets for safe transport while tipped or rolled. The unit includes a custom LM power distribution system for split UPS power and is constructed from ½" Baltic Birch with a durable black textured finish, all protected inside a Pelican iM2975 waterproof case with custom CNC-cut foam.
Portable Photo Booth System
This system was designed for Wenning Entertainment as a complete modular photo booth system. The system is compromised of 2 parts: a top case that holds the camera, lights and computer; and a bottom accessory case that holds the printer, paper, extension cords and replacement ink.
Camera Controller Flypack Workstation
This case was designed for Novartis Pharmaceuticals and integrated by the Whitlock Group as part of a 3 case portable system that is designed to travel between buildings on their campus. This case is designed to compliment the main A/V control unit (more info on that case can be found HERE) by offering a independent camera control station. This case is designed to have the same depth and height as the main workstation allowing the two cases to have a similar esthetic and flow when working next to each other.
Portable Photo Booth System Case Set
This case was designed for the Spencer Daniels Angency to be used as a portable photobooth system comprising of 2 cases: a top case that holds all of the equipment and a bottom case that holds all the support material.
All In One Portable Photo Booth Case
This case was designed for Apollo Photobooths. The case is designed with quick set up and tear down in mind: all items are pre wired allowing the operator to simply plug the case into a standard outlet and hinge open a protective panel once arriving at a job site.
Canon XF305 Camera Case - Pelican 1620
This case was built for Graybow Communications. The design is based around a Pelican 1620 case that features a custom cut foam insert for the camera and 2 compartments for support components.
Sony PDW 700 Camera & HDVF-EL Viewfinder Cases
These cases were designed for the University Of Florida's WUFT TV. The cases feature custom cut CNC foam inserts to store the individual components that make up each equipment set. Each of the cases are built from 3/8" plywood laminated with blue ABS plastic and silk screened with the orange Gators logo.