Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 12-20329
Waterproof Sideline Trunk
This trunk is designed to be a great waterproof solution for transporting gear to the sideline, it works exceptionally well in adverse conditions and on muddy fields. Because the case is waterproof, it is particulary suited for smaller teams that transport equipment in open pick up trucks The trunk features 12 compartments, 2 plastic removable bins and 8" field casters (2 locking/2 non).
- REFERENCE: 12-20329
- CATEGORY: Sports
Related Products
Snap Attack Football Launching Machine Trunk w/European Step Down Power Transformer
This LM Cases portable transport trunk for the University of Nebraska is a fully integrated, turnkey system built around a Snap Attack® football launching machine for professional teams, including those traveling to Europe. The machine is securely mounted with reinforced steel plates and upgraded with a waterproof True1 locking power connector. Power can be supplied from three sources—AC wall power via a live heavy-duty cable reel, a gas-powered generator, or a 220V-to-120V step-down transformer—managed through a custom LM Tour Systems transfer switch with LED indicators, inline voltage/amp meter, and protective breaker.
The rugged case is constructed from ½” plywood with ABS laminate, hinged lids for quick deployment, and elastic netting for football storage. Slide-out shelves house the cable reel and generator, while the transformer is mounted internally. Designed for durability and mobility, the case includes recessed handles and locking 6” field casters, with all electrical integration handled by LM Cases’ Custom Integration department.
NY Jets Custom Coffee & Sewing Workstation
This custom mobile workstation case was built for the New York Jets equipment management staff, combining a coffee station and sewing workstation in a portable trunk design.
The coffee section features a commercial-grade Keurig mounted on a slide-out shelf with a custom CNC-cut bracket and foam retention to keep the machine secure during transport. Power is supplied through a 30 ft retractable cable reel, eliminating the need for a separate power cable. Storage includes three drawers with inserts for up to 240 K-Cups and a small wire rack for additional coffee supplies.
The workstation also includes dedicated storage for a Singer 4411 sewing machine and a drawer with thread dowels for organizing spools. All drawers are built from ½” Baltic Birch, mounted on heavy-duty Accuride glides, and lined with carpet and marine-grade plastic dividers for durability and organization.
Above the drawers is a large storage compartment, and the removable front lid converts into a table with folding legs. The case exterior is constructed from ½” plywood laminated with forest green ABS, finished with recessed hardware and 4” casters for durability and mobility.
NY Jets Custom Equipment Room Workbox
This custom mobile equipment workstation was built for the New York Jets equipment management staff to organize and service tools, tape, and small accessories.
The trunk lid features an 8×3 grid of pegboard-mounted SmartJars that create 24 compartments for small parts, along with eight custom storage compartments made from marine-grade plastic with clear Lexan hinged doors and Southco slam latches. The lid also includes dedicated inserts for a cordless drill and rivet gun and is supported by gas shocks, including one locking shock for safety.
The main work surface is constructed from white marine-grade plastic for high visibility when working with small components. Beneath it are six storage drawers made from ½” Baltic Birch, mounted on heavy-duty Accuride glides and lined with carpet and marine-grade plastic dividers.
The case exterior is built from ABS-laminated plywood and features front doors with 270-degree hinges, recessed hardware, and 6” field casters for durability and mobility.
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
New York Jets Backup Jersey Trunk
This trunk was designed for New York Jets equipment department to be a storage trunk for their backup jerseys. The trunk features a divider network constructed of durable and easy to clean marine grade plastic. This grid creates 80 compartments and each compartment stores a plastic sleeve containing two rolled up jerseys. Each compartment is sized at 7 ¾” x 7 ¼” x 15.” The trunk exterior is built out of 1/2” plywood with black exterior ABS laminate. The trunk rides on 4” casters (front 4 locking) mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
LSU Tape Trunk
This trunk was designed for Louisiana State University’s equipment department to be a catch all utility storage solution for use in athletics and specifically for mulitple rolls of tape. The trunk features a large, bottom storage section built out of easy to clean black ABS. The interior also features 4 removable trays. All 4 are equal in size providing a dimension of 9 7/8” x 26 ¼” x 5 ¾”. Each tray features a hinged lid made from 3/8” clear Lexan. The trunk exterior is built out of 3/8” plywood with black exterior ABS laminate. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large, recessed latches and handles, recessed lid stays and flat triangle corners.
New York Jets Sideline Workbox
This case was designed for the New York Jets equipment management staff to be a mobile workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 5x5 grid of pegboard mounted SmartJars that provide 25 individual storage compartments for small parts. The lid also features 8 compartments constructed from 3/8" clear Lexan. Each compartment features a hinged door with a Southco slam latch. The lid is supported by two ratcheting lid stays. These allow for the lid to be positioned at multiple angles to protect interior contents in the event of inclement weather or high winds.
Univ Of Utah Athletic Trainers Sideline Trunk
This custom sideline trunk was designed for the University Of Utah to be an all-in-one storage solution for sidelines.
Eastern Illinois University Utility Trunk
This equipment trunk is designed to be a catch all utility storage solution for use in athletics. The trunk features an easy to clean black texture coated interior. The interior also features 2 removable trays. One tray is open for general storage; the other tray features 2 removable dividers that create 3 compartments. The trunk exterior is built out of 3/8” plywood with your charcoal exterior laminate color and also features three silkscreened prints of the three color Eastern Illinois logo. The trunk rides on 8” field casters mounted to a .75” plywood caster board covering the entire bottom of the case. The trunk includes large recessed latches and handles, recessed lid stays and round ball corners.
Indianapolis Colts Athletic Trainer’s Sideline Trunk
This custom sideline athletic trainer’s trunk was built for the Indianapolis Colts. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored on the sideline during the game.
Colorado State Sideline Helmet Repair Workstation
This sideline equipment trunk was built for Colorado State University. The trunk is designed to hold 6 back up helmets and provide a worksurface for repairs between plays. The trunk features multiple storage compartments, drawers and power distribution for an all in one, easy to set up repair station.
Yale Univ. Football Pads/Spints/Castings Trunk
This custom athletic trainer’s trunk was built for Yale University. The trunk holds pads, splints & castings for the Yale University football team.
Custom Recruiting Trunk w/Removable Trays For Socks & Gloves
This trunk was built for West Virginia University’s football recruiting program. The trunk features 2 removable trays for gloves and socks. Each of the removable trays are designed to hang on the sides of the trunk.
Snap Attack / Aerial Attack Football Machine Trunk w/Generator
This trunk is designed to hold a Snap Attack football launching machine. The trunk is fully integrated with a 125ft power cable reel, and a gas generator for long distance or remote operation. The lids of the trunk fold down and feature nets for ball storage during use.
Penn State Sideline Drawer Trunk w/Fold Flat Lids
This trunk was designed for Penn State as a sideline storage unit. The trunk features 9 HD drawers and fold flat front lids for fast deployment.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.
Snap Attack® / Aerial Attack® Transport Trunk
This case is designed to hold either a Snap Attack®, or Aerial Attack® machine. The stock case comes standard with a Sports Attack® brand universal mount post installed. The user has the option to mount their existing machine to the case, or have LM Cases provide the machine for a turn key system. The case features split top lids that fold down to the left and right side of the trunk. Cargo nets are installed allowing footballs to be stored in the folded down lids during use. A slide out shelf built out of HD marine grade plastic is included to store a generator or the upgraded power cable reel. A gas powered generator is option is offered by LM Cases if you desire a turn key system. The case comes standard with a 50’ retractable power cable. This power cable is spring loaded allowing the cable to be quickly extended and retracted. An optional 125’ HD power cable mounted on a HD steel reel is offered for users who require additional length. The upgraded power option featured a 14awg hard usage outdoor rated power cable on an industrial strength steel reel. The trunk features 2 accessory compartments located below the main work surface. These accessory compartments are large enough to store the factory tripod that comes standard with the machine, allowing all factory parts to be stored with the machine at all times.
San Diego State Side Line Helmet Repair Tech Work Box
This trunk was built for San Diego State University. The trunk is designed to provide a mobile tool station to be used on a football sideline.
Tennessee Titans Athletic Trainer’s Sideline Trunk
This trunk was designed for the Tennessee Titans football athletic training department. The trunk is designed as trunk for general storage. The trunk features 4 drawers built into an isolated inner shell that separates them from the exterior case. Each drawer is built out of ½” Baltic Birch plywood and is mounted on HD Accuride glides.
United States Naval Academy Football Program Communications Trunk
This case was built for Navy University Football. The trunk is designed to hold headset communication equipment and general accessories on the team’s sideline.