Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 06-15767
Ampeg SVT CL Head Case
This case was designed for Atomic Professional Audio for their backline department. The case is built out of 3/8" plywood laminated with charcoal ABS plastic and features deep recessed handles and 3.5" Colson Casters. The case is designed to fit all models of Ampeg SVT heads.
Special thanks to Atomic Professional Audio!
- REFERENCE: 06-15767
- CATEGORY: Other Industries
Related Products
Road Case For Benson Vinny / Benson Nathan Junior Amp
This custom rolling road case is designed specifically for the Benson Vinny and Nathan Junior combo amplifiers. Built from lightweight ¼” plywood with durable ABS laminate, it features 1.5” PE foam lining and a precision-cut foam support block with an accessory compartment beneath the amp. Recessed hardware and locking 3.5” casters make it tour-ready while allowing the amp to remain in the tray during performance or elevate on the lid for better stage projection.
Benson Monarch Reverb Amplifier Case w/Custom Stencil, Silkscreen & Pink Color
This custom road case by LM Cases is built to protect and transport a Benson Monarch Reverb guitar amplifier. The case features a foam-lined interior with added shock protection, a dedicated accessory compartment, and precise foam cutouts to secure the amp and handle. Constructed from durable plywood with ABS laminate, the case includes stacking caster wells, locking casters, and custom exterior branding for reliable touring use.
Ampeg SVT Bass Amplifier Road Case
This heavy-duty touring case by LM Cases is custom designed for the Ampeg SVT-CL amplifier. Featuring a live-in tray design with 1” foam lining, rugged plywood construction, and recessed hardware, it provides professional-grade protection for transport and use on the road.
Ampeg SVT 410HLF Bass Cabinet Live In Case
Custom live-in ATA road case for Ampeg 410HLF bass cabinet with shock-absorbing foam, removable front lid, trap door access, and locking Colson casters.
Aguilar Tone Hammer Bass Amplifier Road Case
Custom LM Cases road case designed for the Aguilar Tone Hammer bass amplifier, featuring a 1″ PE foam interior, accessory compartment, and lightweight ABS-laminated plywood construction for touring protection.
Tam Tam Transport Case
Custom orchestral tam tam case by LM Cases featuring a welded 4” x 2” aluminum tube suspension frame for secure transport and in-case performance. Designed with a split G-style lid for one-person operation, custom foam blocking to prevent movement, and a black carpet-lined tray that doubles as a rolling cart. Built from durable 3/8” plywood laminated with black ABS, equipped with recessed handles, heavy-duty latches, and 4” locking Colson casters. Ideal for professional ensembles, touring musicians, and military bands requiring rugged protection and mobility for large tam tams.
Transport Case For 10 Humes & Berg Everglow 330 Jazz Ensemble Music Stands
This custom LM Cases transport case is designed to hold 10 Humes & Berg Everglow 330 jazz ensemble music stands. The interior uses removable marine-grade plastic dividers to securely separate each stand, with dedicated compartments sized for a precise fit. Two removable, carpet-lined accessory trays provide additional storage for small items.
Built from durable laminated plywood with recessed hardware and mounted on smooth-rolling casters, the case offers a rugged, mobile solution for safely transporting and organizing ensemble music stands.
All In One Percussion Large Format Transport Case
This custom LM Cases percussion case is designed to transport a complete percussion rig in a single large-format road case. The interior features multiple purpose-built compartments using PE foam laminated with HDPE plastic for durability and easy loading, allowing instruments to slide in and out without damaging the foam.
The case accommodates a Pearl Mallet Station, glockenspiel, congas, bongos, wind chimes, video monitors, an in-ear monitor rack, stands, drum rugs, and accessories, along with several carpet-lined storage drawers. Built from rugged laminated plywood with a removable front lid, heavy-duty recessed hardware, and locking casters, the case is engineered for organized, tour-ready percussion transport.
Dr. Z Z80 2x12 Cabinet Road Case
This custom case built by LM Cases for the Steve Miller Band and designed for the Dr. Z Z80 2x12 speaker cabinet. The case features a pull over lid with the cabinet living in the case’s tray. The interior is lined with 1” PE foam with 2” PE foam under the cabinet. The 2” bottom foam block features cut outs in the corners allowing the rubber feet to “float”.
Piggyback Alto & Tenor Sax Cases For Mark Rivera
These cases were built to hold an alto saxophone and tenor saxophone for Mark Rivera. Each outer road case is designed to hold a molded case for each sax.
Compact Guitar Tech Case For Fly Dates
This case is designed for the touring guitar tech who needs a smaller workbox for fly dates and smaller venues. The case features a ½” black marine grade plastic deck piece. The deck includes 2 fold outs designed to expand the work surface and hold the guitar in place by its body and neck. Each of the fold outs are mounted via position control hinges. These hinges perform in the same way as a laptop screen allowing the fold outs to be mounted at any angle along a 90-degree plane. The neck support features rubber bushings arranged in a “V” to allow the gripping of any neck shape. The body support features a piece of purple crushed velvet foam and a “V” shaped piece of ½” marine grade plastic to lock the guitar in place via the strap button.
Dr. Z Z80 Guitar Amp Head Road Case
This custom flight case is designed for Steve Miller for the Dr. Z Z80 amp head. The case interior is lined with 1” PE foam. A 14” wide x 7” deep x 1” tall accessory compartment is located under the amplifier for storage.
Amplified Nation OverDrive Reverb Guitar Amp Case
This custom case was built for Lake Baum for his Amplified Nation Overdrive Reverb amplifier and 1x12 cabinet. The custom case lid configuration allows it to operate as a “live in” or a “pull over”.
Dr. Z X-Ray Combo Amp Road Case
This custom case is designed for the Steve Miller for his Dr Z X-Ray Combo guitar amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.
Orange OBC410 Bass Cabinet Case
The custom case is designed for the Orange OBC410 bass cabinet. The cabinet is held in a 1” PE foam lined interior. 2” PE foam is used underneath the cabinet for additional support. The lid pulls over the speaker cabinet allowing it to live in the case tray during a performance.
Orange AD200B Bass Amplifier Case
This case is designed for the Orange AD200B bass amplifier. The case interior is lined with 1” PE foam, with 2” PE foam under the amp head. The lid is removable with the amp living in the case tray. The lid features 3 deep recessed handles and 4 large, recessed latches. The case is built from 3/8” plywood laminated with your choice of ABS plastic colors.
Custom Vox AC30S1 Road Case
This custom case is designed for the Vox AC30S1. The amplifier is held in place by custom CNC cut PE foam. The amp is surrounded by 1” foam on the top and sides with 2” PE foam underneath. The bottom foam insert allows the rubber feet on the amp to float with the bottom cabinet being fully supported. A 14” wide x 8” deep x 2” tall accessory compartment is provided under the amp for additional storage.
Sequential Prophet 10 Analog Synth Road Case
This custom road case is designed for the Sequential Prophet 10 analog poly synth. The keyboard is held in a custom 1” PE foam lined compartment. A 3.5” Ester foam block is mounted in the lid to softly touch the keys and hold the synth in place during transport. A carpet lined accessory compartment is provided for additional storage.
Custom Road Case For Gibson SG Guitar
This custom flight case is designed to fit a Gibson SG electric guitar. The case is constructed from our XL Series aluminum. This aluminum features tongue and groove built into the extruded shape for a very tight, and secure seal between the lid and the tray. The case interior is custom cut from Ester foam and contours the shape of the guitar body. Crucial stress points of the guitar are supported with additional foam blocks. All interior foam is wrapped with purple crushed velvet. A custom accessory compartment with a hinged door is provided for additional storage.
Benson Monarch Reverb 1x12 Amp Road Case
This custom case is designed for the Benson Monarch Reverb guitar amplifier. The case interior is lined with 1” PE foam, with 3” PE foam under the amp. A 2.5” accessory compartment is located underneath the amp. The bottom foam accommodates the amp cabinet’s feet with 4 circular cut outs allowing the cabinet to sit directly on the foam. This accommodation is also provided in the lid foam for the cabinet’s top strap handle.