Request Info
Are you looking for something like this? We've got you covered. Complete the form below, and we'll get back to you about your project. If you'd rather give us a call at 800-874-8326, be sure to mention the reference number below.
REFERENCE: 17826
Florida Gators Medical Trunk
This case was built for the Florida Gators to hold all the teams medical equipment. The lid features a storage unit that has 24 individual drawers for small items such as bandages. The lid also features 2 storage compartments for bottles, the items stored in the lid are kept in place during transport via a laminated panel with Southco slam latches. The interior of the case features a large carpet covered work surface, with 3 large drawers mounted on Accuride drawer glides for storage.
The exterior of the case features recessed hardware, 3.5" Colson casters and a custom silkscreen of the Gators logo.
Special thanks to the Florida Gators!
- REFERENCE: 17826
- CATEGORY: Sports
Related Products
University of Houston Medical Trunk
This trunk was built for the University of Houston football training staff. The case is designed to be a mobile work station that holds a variety of training accessories and mecdical tools. The trunk lid features six Tilt Lock bin units (NOTE - these are now discontinued) that provide twelve individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features four drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top two drawers feature two dividers allowing each drawer to be divided into three compartments. The bottom two drawers feature a single center divider allowing two compartments. Each compartment in the top two drawers is 11.25" wide x 21" deep x 7.5" tall. The bottom drawer compartments are 17.125" wide x 21" deep x 7.5" tall.
New York Jets Custom Sideline Workbox
The case is designed for the New York Jets equipment management staff to be a mobile sideline workstation that holds a variety of accessories, such as tape and various tools. The trunk lid features a 8x8 grid of pegboard mounted SmartJars that provide 64 individual storage compartments for small parts. The lid also features 12 custom storage compartments constructed from ½” marine grade plastic. Each compartment features a hinged door made from 3/8" clear Lexan locks with a Southco slam latch. The lid is supported by two gas shock supports, one locking to prevent unintentional lid closures.
BYU Athletic Trainer’s Workbox
This custom indoor athletic trainer’s trunk was built for the Brigham Young University football team. The trunk is designed to be a mobile workstation for the team’s athletic trainers stored indoors during games.
KC Chiefs Athletic Trainer’s Locker Room Medical Workstation
This custom locker room trunk was built for the Kansas City Chiefs as an all-in-one workstation for their traveling athletic trainers. The trunk holds items in neat and organized bins and provides a work surface for tasks.
KC Chiefs Modalities Workbox
This custom modality trunk was built for the Kansas City Chiefs. The custom workbox is designed to hold various items needed by the team when they are on the road.
6 Drawer Craftsman Tool Chest w/Tour Grade Flight Case
This portable heavy duty tool chest is designed for mobile productions and technicians alike. The HD Craftsman® tool chest features 6 heavy duty drawers and a large work surface protected by a gas spring assisted lid. The work surface features 6 AC power outlets and 2 USB A charging ports. Power is brought into the case via a LM Tour Systems DSK-I inlet box. The DSK-I box features a locking Neutrik True1® power inlet and a courtesy True1® power outlet. A HD LM Tour Systems 25ft True1 power cable is included.
6 Drawer Sideline Window Trunk
This 6-drawer sideline window drawer trunk was designed for West Virginia Football. The trunk features 6 equally sized drawers with interior dimensions of 10.875” wide x 22” deep x 12” tall. Each drawer is built from ½” Baltic Birch plywood, finished with black texture coating and mounted on HD Accuride glides.
Buffalo Bills Upper/Lower Extremities Athletic Trainers Trunk
This athletic trainer's trunk was designed for the Buffalo Bills. The trunk features 4 equally sized drawers with 2 removable ¼” marine grade plastic dividers per drawer. Each drawer features a magnet at the back that secures it to the case wall when not in use. This helps to keep drawers closed when the trunk is moved around with the lid open. Each drawer is built from ½” Baltic birch as is finished with black textured coating. The drawers are mounted on HD Accuride glides. The trunk’s front lid features a bottom divider for bottle storage.
PGA Tour Medical Workbox
This trunk was built for the PGA Tour’s medical staff. The trunk is designed to be a central medical supply station.
Davidson College Athletic Trainers Workbox Trunk
This trunk was built for Davidson College’s athletic training department as a large format storage trunk. The trunk features a retractable sunshade, hinged tape holders, custom drawers, and multiple storage bins.
Sacramento State 8 Drawer Sideline Drawer Trunk Workbox
This custom sideline trunk was designed for Sacramento State. The trunk features 8 drawers for storage.
Mobile Technicians Tool Box w/Integrated Power & Task Lighting
This mobile technicians tool workbox is designed for the storage of small tools and specialty items. The workbox is designed to hold all tools needed and provide a work surface for mobile repairs and maintenance. The toolbox features 9 drawers of varying sizes. 2 drawers feature movable dividers allowing users to configure the drawers per their custom requirements. A pop-up table is mounted in the lid providing a work surface when space is at premium. A LM Tour Systems WBQB-L is mounted in the lid providing 2 flexible 15” LED task lights, 4 AC outlets, 2 USB-A, and 2 USB-C charging ports. Below the pop up table is a storage space for aerosol cans.
10 Drawer Large Format Production Workbox Case
This workbox was designed for the BackStreet Boys wardrobe department. The workbox features 10 drawers. Each drawer is built out of ½” Baltic Birch plywood, mounted on HD Accuride glides, and finished with black texture coating. A storage compartment is located above the top drawer in each section. The compartment is sealed with a removable ½” Marine Grade plastic lid. The drawers are built into a ½” plywood shell that is independent from the external case.
Tennessee Titans Athletic Trainer’s Sideline Trunk
This trunk was designed for the Tennessee Titans football athletic training department. The trunk is designed as trunk for general storage. The trunk features 4 drawers built into an isolated inner shell that separates them from the exterior case. Each drawer is built out of ½” Baltic Birch plywood and is mounted on HD Accuride glides.
Boise State University Communications Work Box
This case was built for Boise State University. The case is designed to hold CoachComm belt packs, headsets and accessories for the team.
Cleveland Browns Fluids Trunk
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories and various tools. The trunk lid features eight Tilt Lock bin units that provide sixteen individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features four drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top two drawers feature two dividers allowing each drawer to be divided into three compartments. The bottom two drawers feature a single center divider allowing two compartments. Each compartment in the top two drawers is 11.25" wide x 21" deep x 7.5" tall. The bottom drawer compartments are 17.125" wide x 21" deep x 7.5" tall.
Cleveland Browns Locker Room Supply Trunk
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories, such as tape and various tools. The trunk lid features four Tilt Lock bin units that provide eight individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid also features 6 compartments constructed from 3/8" clear Lexan. Each compartment features a hinged door with a Southco slam latch. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features three drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top two drawers feature three removable dividers allowing each drawer to be divided into four compartments. Each compartment in the top two drawers is 7.25" wide x 21" deep x 11" tall. The bottom drawer features two removable dividers for a total of three compartments. Each compartment is 9.75" wide x 21" deep x 6" tall.
Cleveland Browns Field Trunk Workbox
This trunk was built for the Cleveland Browns. The case is designed to be a mobile work station that holds a variety of accessories, such as tape and various tools. The trunk lid features eight Tilt Lock bin units that provide sixteen individual storage compartments for small parts. The Tilt Lock bins feature translucent plastic that allow users to quickly see the contents of each bin at eye level. The lid is supported with gas springs that aid in the opening and closing of the lid. One of the two gas springs feature a locking mechanism to prevent the lid from accidentally closing during use. The main work surface is built out of clear 3/8" scratch resistant Lexan, which allows users to see the contents of the drawers mounted below. The main body of the case features six drawers. The drawers are built into a 1/2" plywood inner shell that is independent of the exterior case. The separate shell allows the drawers to be independent from the exterior case, which allows the appearance of a cleaner exterior due to the lack of exposed rivets used for mounting the drawers. It also prevents any flexing or loading that the case exterior endures from transferring to the drawer glides. Each drawer is custom built out of 1/2" Baltic Birch plywood and mounted on HD Accuride glides. The top left drawer features two removable tape caddies built out of 1/2" marine grade plastic. Each tape caddy features ten spindles for a total of twenty. Two drawers are split into six compartments with removable dividers, and two drawers are split into twelve compartments with removable dividers. The bottom right portion of the case features a 20.5" wide x 10.625" tall open storage compartment for bags.
Sideline Tool Workstation
This case is designed to be a all in one tool box for mid game repairs on the sideline. The trunk features a Rigid 18v drill and charger, and 3 sets of Tilt Lock bins mounted in the lid. Below the lid, is a large work surface built out of 1/2" marine grade black plastic that provides a softer surface for working on helmets. The trunk features 6 drawers mounted in an isolated inner shell, the drawers are all 19.5" wide x 21.75" deep; 2 of the drawers are 4" tall and 4 of the drawers are 11" tall.
Detroit Tigers Medical Workbox
This trunk was designed for the Detroit Tigers as a medical workstation to be used in the teams locker room. The trunk features 3 Tilt Lock bins mounted in the lid, a work surface with an integrated power strip and 3 storage drawers.